Thermostat

Philipniceguy exotics is pleased to announce the arrival of Digital On/ Off Thermostats perfect for controlling heat mats, Heat pads, ceramic heaters etc ideal for controlling the blue heat pads I use for nesting areas for your monitor species (or other reptiles) to lay their eggs in. It would also help at night to keep the vivarium temperature up. Use with either a heat mat or better yet upgrade to the blue heat pads listed on my products page for a safe, strong reliable heating of your substrate needs. Waterproof sensor for use in substrate. Can not be used to control bulbs (see dimmer stat below for that) can be used for other heat products that are suitable for on/off use.

Temperature setting from 16'c to 40'c

cooling differential trigger setting range from 1'c to 16'c (for example set at 1'c if the temperature is hotter than 1'c above the set temperature the cooling socket will be activated (11 market socket)

heating differential trigger setting range from 1'c to 16'c (for example set at 2'c if the temperature is cooler than 2'c below the set temperature the heating socket will be activated (1 market socket).

I set my own nesting and incubator all at 30'c with a heating and cooling differential setting of 1'c and my heater plugged into socket marked 1 (I have nothing plugged into the cool socket on my own setups) but you could add fans etc if desired.

The plug to heat/cool sockets cable is 90cm then from the sockets too the control panel is 90cm and from the control panel to tip of waterproof sensor is another 2M. Plenty of cable for most setup arrangements.

Philipniceguy exotics is pleased to announce the arrival of Digital Dimmer Thermostats perfect for controlling the light bulbs , heat mats, heat pads etc. Ideal for use with halogen floodlight bulbs often used for basking monitor lizards and the second socket can be used to control the UV lights on the timer. Waterproof sensor for use in substrate unlike many on the market already. More accurate than the on/off thermostat as can be changed in 0.1'c increments unlike the on/off which is 1.0'c increments.

Temperature setting from 0'c to 50'c in settings of 0.1'C

one socket for heating with day/night function (for example set it to have basking like on at 30'c in the daytime and to 10'c at night meaning it would not come on unless super cold (which shouldnt happen anyway in most setups)

second socket for timer use for example plugging your UV light into and this switches on for 12 hour day and off for 12 hours.

The plug to sockets cable is 90cm then from the sockets too the control panel is 90cm and from the control panel to tip of waterproof sensor is another 2M. Plenty of cable for most setup arrangements.

Above video is a quick guide to setting the dimming thermostat up or below is a instruction guide PDF